[C38] need big prop
Max Soto
maxsoto at gmail.com
Fri Sep 16 18:59:57 EDT 2011
Hey Chuck, I requested a quote from Campbell last week, and they send it for a 17" prop... I sent back an email, telling them that 16" is the max diameter that we can use on a fixed blade prop, so hopefully, I will have a new quote by Monday... Also got a quote for a michigan.
Minneys don't have anything that I could use, so, I'm running short of options, but I'll keep looking for a while...
Regards, max
Sent from my iPod
On Sep 16, 2011, at 6:17, Chuck Finn <charles at finn.ws> wrote:
> Max,
> Several of us have the Campbell Sailer prop from West by North. They cost about $500 and you can get whatever size/pitch you want, working with their designer. When I bought the Mighty Quinn, it came with a two blade michigan and a martec folding prop. I found the folding prop wasn't much good for anything but meeting racing requirements. And, the two blade prop left me thinking the 5424 was seriously under-powered for my boat.... It is hard to describe how much difference the Sailer prop made. Lots more power at lower rpms. Much less prop walk. Markedly less engine noise and vibration. And, less drag than the two blade.
> As to the racing question. While PHRF rating systems differ by club, many do tax your for the folding prop. My club assesses 6 seconds for a folding prop.
> And finally, because everyone in my club knows I am a diver. I routinely get calls from friends to "take a look at" their keel, prop, rudder, paddle wheel. Usually, all this entails is to put down my wine glass and dive over the side, but a couple times of late it has been to try to release folded props. In both instances all I had to do was work them back and forth and they released, but a lot of the folks I sail with are not capable of doing this themselves. Not a good thing when you are at some anchorage and have to power home. I really like reliability!
>
> Chuck Finn
> Mighty Quinn #114
> Great Lakes
>
> On 9/15/2011 11:19 PM, Max Soto wrote:
>>
>> Hey Steve,
>> I just checked Bacon sails and there's nothing similar to what I'm looking for.. I'm going to give them a call tomorrow, as well as Minney's. Dan is right, and they might have something that is not listed on the web. Your two blade prop won't work for me, because is too small for the new engine, so, I just have to keep looking around!
>> Regards,
>> Max
>>
>> 2011/9/14 Steve Smolinske <SSmolinske at rainierrubber.com>
>> Max, we got our martech for Transpac from Bacon Sails $100 and in very good condition. We also have a three bladed max prop that is fantastic, pricey but really nice on all points. Have the original 15X13 two blade fixed prop as well if your interested. IF you need a really big prop talk to Larry he was quite helpful in having a diver install one for us in the 26" range prior to Transpac,,,,,thanks again Larry! LOL.
>>
>> Steve
>>
>> ________________________________
>>
>> From: listserve-bounces at catalina38.org on behalf of D McC
>> Sent: Wed 9/14/2011 8:49 PM
>> To: Catalina 38 Listserve
>> Subject: Re: [C38] need big prop
>>
>>
>> Hello Max,
>>
>> Check with Minneys Yacht surplus.
>> http://www.minneysyachtsurplus.com/
>> Their website does not show what they actually have in their inventory.
>>
>> The last time I was in there they had 4 Martec Elipticals that would fit our boats and dozens of other props. I don't know what they have that might fit but they are really good at finding what you need and shipping it at a reasonable cost. I have a Martec eliptical and it performs better than the fixed 2-blade that it replaced.
>>
>> <><><><><><><><><><><><><><><><><><><><><><><><><><><>
>>
>> Common Sense is a rare gift from the Gods.
>> Most people have only technical training!
>>
>> <><><><><><><><><><><><><><><><><><><><><><><><><><><>
>>
>> The gods do not deduct from man's allotted span those hours spent in sailing.
>>
>> <><><><><><><><><><><><><><><><><><><><><><><><><><><>
>>
>> When in doubt, try the vice You haven't tried before!
>>
>> --- On Wed, 9/14/11, Max Soto <maxsoto at gmail.com> wrote:
>>
>>
>>
>> From: Max Soto <maxsoto at gmail.com>
>> Subject: [C38] need big prop
>> To: "Catalina 38 Listserve" <Listserve at catalina38.org>
>> Date: Wednesday, September 14, 2011, 12:31 PM
>>
>>
>> Hi everyvody,
>>
>> I was checking my prop options with Michigan props. Since the fixed blade max diameter allowed on our boats is 16", according to the new engine and tranmission ratio, I'll have to use a 3 blade 16x18 prop. I wanted a 2 blade, but was told that with this numbers, I'll be a very weird prop....
>>
>> Next year, after I'll recover from all the unexpected expenses, I'm planning to get a Kiwi prop, but in the meantime, I need prop shop recommendations, so I can try to get a used prop in this size...
>>
>> Any shop recommendations with big prop inventory????
>> Regards,
>>
>> Max Soto
>> C38 #198 ESTANCIA
>> Puntarenas, Costa Rica
>>
>>
>> -----Inline Attachment Follows-----
>>
>>
>> _______________________________________________
>> Listserve mailing list
>> Listserve at catalina38.org
>> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>>
>>
>>
>> _______________________________________________
>> Listserve mailing list
>> Listserve at catalina38.org
>> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>>
>>
>>
>>
>> --
>> Max Soto
>> C38 #198 ESTANCIA
>> Puntarenas, Costa Rica
>>
>>
>> _______________________________________________
>> Listserve mailing list
>> Listserve at catalina38.org
>> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
>
> _______________________________________________
> Listserve mailing list
> Listserve at catalina38.org
> http://catalina38.org/mailman/listinfo/listserve_catalina38.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20110916/fb225813/attachment-0001.htm>
More information about the Listserve
mailing list