[C38] prop shaft
Steve Smolinske
SSmolinske at rainierrubber.com
Wed Nov 9 12:52:25 EST 2011
Dang that will sure add some drag to the boat.
From: listserve-bounces at catalina38.org
[mailto:listserve-bounces at catalina38.org] On Behalf Of Max Soto
Sent: Wednesday, November 09, 2011 8:04 AM
To: Catalina 38 Listserve
Subject: Re: [C38] prop shaft
Hi Bob, just for comparison purposes, here is a pic from Estancia. The
prop on the shaft is a Michigan Sailer 14x14, and the one I'm holding
right next to it is a Martec 17x10. With the 17" prop I will have only
1/2" clearance.
Those of you with Kiwis, do you remember how much hull clearance is left
with the 16" Kiwi installed??
Regards,
Max
2011/11/7 Bob Gouley <r.gouley at sympatico.ca>
Gentlemen and ladies, if any of you have your prop shaft removed,
for a cutlass bearing, coupler, pack less seal or any other reason, I
would greatly appreciate if you would measure your prop shaft and send
the info to the E-mail below. Please tell me if your shaft is an
original silicon/bronze shaft. My shaft is 47 inches long. Kiwi props
tells me that the recommended kiwi prop is 15.5 X 22 degrees and
requires one half inch of hull clearance. I can not fit a prop of this
size. Kiwi tells me that 4 cat 38 have this prop. I wonder if my prop
was shortened. I use a 13 X 13 chris craft prop that has a bushing in
it so it will fit the taper on my shaft. This 13 inch prop has one inch
of hull clearance. Any info would be greatly appreciated .
bob gouley
Zephyr hull # 142
St Joseph Island
ontario canada
r.gouley at sympatico.ca
_______________________________________________
Listserve mailing list
Listserve at catalina38.org
http://catalina38.org/mailman/listinfo/listserve_catalina38.org
--
Max Soto
C38 #198 ESTANCIA
Puntarenas, Costa Rica
________________________________
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1411 / Virus Database: 2092/4005 - Release Date: 11/08/11
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://catalina38.org/pipermail/listserve_catalina38.org/attachments/20111109/7bde7b48/attachment-0001.htm>
More information about the Listserve
mailing list